LoRaWAN Developer Kit with LoRa E5 Developer Kit: Develop more possibilities with Helium LongFi Network, compatible with SenseCAP M1
Powered by LongFi technology, fully compatible with SenseCAP M1 US915/EU868 versions with FCC/CE certificates respectively.
SenseCAP M1 Developer Kit helps you quickly prototype LoRAWAN applications connected to the Helium network, including environmental monitoring, agricultural, automation, asset tracking, etc.
Connect · Code · Create!
- Fully compatible with SenseCAP M1 LoRaWAN Indoor Gateway (US915/EU868)
- Global LoRaWAN® frequency band supported including EU868 / US915 / AU915 / AS923 / KR920 / IN865
- Ultra-low power consumption and high performance comes with battery cases, easy testing, and rapid prototyping
- Comes with two LoRa-E5 Development Kit - based on LoRa-E5 STM32WLE5JC, LoRaWAN protocol and worldwide frequency supported, easy to develop applications such as environmental monitoring, agricultural, automation, asset tracking, etc.
- Long-distance transmission range up to 10km (ideal value in open area)
- Mini and compact size, suitable for rapid testing and building small size prototype
- Convenient RESET and BOOT buttons on board.
SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with Helium LongFi Network. Now we bring you the SenseCAP M1 developer kit with two LoRa E5 Developer Kit to help all developers connect to The Peoples Network and quickly build final products from prototype to production.
SenseCAP M1 has US915/EU868 versions with FCC/CE certificates. It provides built-in BLE, which helps you set up the device in a few simple steps, and it supports connecting to the internet via Wi-Fi or Ethernet.
There are two LoRa E5 Dev boards included so that you can design to work with a single node at the same time or create two different nodes to complement each other's benefits. LoRa E5 Developer Kit is a compacted-sized dev board suitable for the rapid testing and building of small-size LoRa devices and application prototyping. LoRa E5 Developer Kit is embedded with and leads out full GPIOs of LoRa-E5 STM32WLE5JC. It has rich interfaces including UART, ADC, SPI, IIC, etc. Supporting LoRaWAN protocol and global frequency, LoRa E5 Developer Kiti is able to achieve a transmission range of up to 10 km in open area and ultra-low power consumption.
The kit features a selection of eight different Grove modules to help you quickly prototype LoRAWAN applications connected to the Helium network, from environmental monitoring, agricultural, automation, asset tracking, etc. By pairing LoRa E5 Developer Kit Dev Board and the Grove modules, connecting with SenseCAP M1, the complete IoT system is ready to join Helium Network. The data you collected can also be visualized in real-time and integrated with 3rd party platforms such as Datacake and Ubidots, which will take you into the next stage of your production with SenseCAP M1 and Helium.
Seeed is the official ST Authorized Partner to bring you STMicroelectronics solutions from Modules to Development Boards, one-stop prototyping services with Seeed Fusion, and integration customization.
SenseCAP M1 can connect to The People’s Network within a few simple steps in minutes, and helps you build LoRa applications with low costs. SenseCAP M1 provides miles of wireless network coverage and data transmission capacity for LoRa/LoRaWAN devices. It helps you join and contribute to the infrastructure of The People’s Network while enjoying the benefits from the Helium community.
2 x LoRa-E5 Development Kit - based on LoRa-E5 STM32WLE5JC, LoRaWAN protocol and worldwide frequency supported.
Grove - GPS (Air530)
Grove - Temp&Humi&Barometer Sensor (BME280): Detects surrounding temperature, humidity and air pressure values
Grove - Light Sensor v1.2 - LS06-S phototransistor
Grove - Soil Moisture Sensor
Grove - Sound: Detects surrounding sound intensity
Grove - Relay
Grove - Piezo Buzzer/Active Buzzer - Arduino/Raspberry Pi Compatible
Grove - 3-Axis Digital Accelerometer(±1.5g)